Danfoss 134L0521 FC-302P30KT5E20H5BGCXXXSXXXXA0BXCXXXXDX Frequency Inverter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Danfoss 134L0521 is a VLT AutomationDrive FC 302 frequency inverter with model/type FC-302P30KT5E20H5BGCXXXSXXXXA0BXCXXXXDX. This 30 kW, 40 HP drive is designed for three-phase 380-500 V AC motor applications and has an IP20 chassis construction. The FC 302 platform supports asynchronous, permanent magnet and synchronous reluctance motors, making this configured Danfoss drive suitable for industrial motor speed and torque control.
Replacement commissioning uses the drive's built-in USB connection with Danfoss MCT 10 Set-up Software, or the included LCP 102 graphical local control panel for local parameterization and operation. The LCP 102 supports parameter backup and transfer, while four independent parameter setups can be stored in the drive. Verify the installed configuration before fitting a spare, including the original communication option cards, RFI configuration and brake chopper requirement. Optional network integration depends on an installed MCA 120 PROFINET or MCA 101 PROFIBUS DP card.
For troubleshooting, the LCP 102 provides a graphical display and alarm or warning log buffer. Diagnostic information can also be monitored through the RS-485 interface, Danfoss FC Protocol, Modbus RTU or an installed fieldbus connection, while MCT 10 provides PC-based diagnostic logging. The green ON indicator shows control-card power and drive operation, the yellow WARN. indicator shows a warning condition, and the red ALARM indicator shows a trip or internal trip lock; a persistent ALARM indication after power cycling may indicate an internal hardware failure.
Technical Specifications
| Manufacturer | Danfoss |
| Part number | 134L0521 |
| Model/type | FC-302P30KT5E20H5BGCXXXSXXXXA0BXCXXXXDX |
| Product family | VLT AutomationDrive FC 302 |
| Component type | Frequency inverter |
| Rated motor power | 30 kW |
| Rated motor power | 40 HP |
| Supply voltage | 380-500 V AC |
| Number of supply phases | 3 |
| Motor compatibility | Asynchronous, permanent magnet, and synchronous reluctance motors |
| Brake chopper | Integrated |
| RFI/EMC filter | Standard RFI filter, H5 configuration |
| Protection rating | IP20 |
| RS-485 interface | Built-in terminal-strip interface supporting Danfoss FC Protocol and Modbus RTU |
| USB interface | Built-in USB connection for commissioning and parameterization |
| Parameter setups | 4 independent parameter setups |
| Local control panel | LCP 102 graphical display panel included |
| Optional PROFINET support | Available with MCA 120 PROFINET card |
| Optional PROFIBUS DP support | Available with MCA 101 PROFIBUS card |
Programming and Configuration
Danfoss MCT 10 Set-up Software connects through the built-in USB interface for PC-based commissioning, parameterization, diagnostic logging and parameter management. The LCP 102 graphical local control panel provides local access to control and drive parameters.
The LCP 102 supports parameter backup and transfer, and the drive can store four independent parameter setups. When replacing a configured FC 302 drive, transfer the required parameter setup and confirm that the replacement configuration matches the original machine installation.
Configuration work should also include checking the installed communication option, RFI configuration and brake chopper requirement. PROFINET communication depends on the MCA 120 card, while PROFIBUS DP communication depends on the MCA 101 card.
Communication and System Integration
The drive has a built-in RS-485 terminal-strip interface supporting Danfoss FC Protocol and Modbus RTU. This interface can be used for network communication and for monitoring status words and diagnostic registers.
PC commissioning and parameterization are available through the built-in USB connection with Danfoss MCT 10 Set-up Software. Local operation, parameter access and display-based diagnostics are provided by the included LCP 102 graphical control panel.
Optional fieldbus integration is configuration-dependent. An MCA 120 option card provides PROFINET support, while an MCA 101 option card provides PROFIBUS DP support. Confirm the installed option card when matching a replacement drive to an existing network.
Diagnostics and Status Indication
The LCP 102 graphical display provides local status information and access to the alarm and warning log buffer. Diagnostic monitoring is also available through RS-485 or an installed fieldbus connection using status words and diagnostic registers, with additional PC-based diagnostic logging through MCT 10 Set-up Software.
The front-panel indicators distinguish normal operation, warning conditions and alarm states. A persistent red ALARM indication after power cycling may indicate an internal hardware failure and can support a repair or tested exchange-unit decision.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| ON | Green | Indicates that power is supplied to the control card and the drive is operational. |
| WARN. | Yellow | Indicates that a warning condition exists in the drive. |
| ALARM | Red | Indicates an alarm condition causing a drive trip or internal trip lock. A persistent indication after power cycling may indicate an internal hardware failure. |
Replacement and Spare Part Considerations
Match the replacement against Danfoss part number 134L0521 and model/type FC-302P30KT5E20H5BGCXXXSXXXXA0BXCXXXXDX. Confirm the 30 kW, 40 HP rating, three-phase 380-500 V AC supply, IP20 chassis, integrated brake chopper and standard RFI filter with H5 configuration.
For a configured spare, check the installed MCA option card before ordering. PROFINET requires the MCA 120 card and PROFIBUS DP requires the MCA 101 card. The communication interface, motor technology, RFI configuration and brake chopper requirement must match the machine installation.
Before returning the replacement to service, transfer the required parameter setup using the LCP 102 or MCT 10 Set-up Software and verify the communication configuration. The four available parameter setups support alternate operating conditions when the machine requires stored configuration changes.
Frequently Asked Questions
What is the Danfoss 134L0521?
The Danfoss 134L0521 is a VLT AutomationDrive FC 302 frequency inverter with model/type FC-302P30KT5E20H5BGCXXXSXXXXA0BXCXXXXDX. It is rated at 30 kW or 40 HP for three-phase 380-500 V AC motor applications.
Which motors can the FC 302 platform control?
The FC 302 platform supports asynchronous, permanent magnet and synchronous reluctance motors.
How is the 134L0521 commissioned?
Commissioning can be performed locally with the included LCP 102 graphical control panel or from a PC through the built-in USB connection using Danfoss MCT 10 Set-up Software.
Which communication protocols are built in?
The drive has a built-in RS-485 terminal-strip interface supporting Danfoss FC Protocol and Modbus RTU. PROFINET and PROFIBUS DP require the corresponding MCA 120 or MCA 101 option card.
How can parameters be transferred to a replacement drive?
The LCP 102 supports parameter backup and transfer, and MCT 10 Set-up Software supports PC-based parameter management. The FC 302 drive can store four independent parameter setups.
What does a persistent red ALARM indication mean?
The red ALARM indicator shows an alarm condition causing a drive trip or internal trip lock. If the indication remains after power cycling, it may indicate an internal hardware failure.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Danfoss.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.